Installing The Reversible Shredding Disc; Installing The Multipurpose Blade Or Dough Blade - KitchenAid KFP1133WH Instructions Manual

CMD + SHIFT CLICK TO CHANGE COPY ASSEMBLING THE FOOD PROCESSOR
Installing the r_ever_sible shr_edding disc
Hold the or reversible shredding disc
1
by the 2 finger grips with the desired
shredding side facing UP . Insert the disc
adapter into the hole in the bottom of
the disc.
TIP: You may need to turn the disc/adapter until it drops down into place.
Install the work bowl cover, being sure
3
it locks into place.
Installing the multipur_pose blade or_ dough blade
IMPORTANT: The multipurpose blade and dough blade can only be used with the work bowl.
Place the blade on the power shaft.
1
Rotate the blade so it falls into place on
the power shaft.
TIP: The multipurpose blade features an internal seal that fits tightly over the center of the
work bowl.
Finger_ gr_ip
2
2
With the work bowl installed, slide the
drive adapter onto the power shaft.
Push to lock: Press down firmly on the
blade until it is down as far as it will go.
Dr_ive
adapter_
11