Adjusting The Slicing Thickness; Installing The Reversible Shredding Disc - KitchenAid KFP1133 Instructions Manual

ASSEMBLING THE FOOD PROCESSOR

ADJUSTING THE SLICING THICKNESS

Thinner
Set the desired slicing thickness by
moving the lever to the left for thinner
slices or to the right for thicker slices.

INSTALLING THE REVERSIBLE SHREDDING DISC

Hold the or reversible shredding
disc by the 2 finger grips with the
1
desired shredding side facing UP.
Insert the disc adapter into the hole
in the bottom of the disc.
TIP: You may need to turn the disc/adapter until it drops down into place.
Install the work bowl cover, being sure
3
it locks into place.
W10679565B.indb 9
NOTE: The lever only works with the
adjustable slicing disc. Changing thickness
settings with other discs or blades
installed will have no effect on operation.
Thicker
Finger grip
2
ASSEMBLING THE FOOD PROCESSOR | 9
With the work bowl installed, slide
the drive adapter onto the power
shaft.
Drive adapter
3/22/2019 4:15:57 PM