Horizontal Position - Omron POWLI BU100XR2 Instruction Manual

2. Stationary installation
The UPS permits the following positions shown in the illustrations only.
● Horizontal position
Place the UPS with the factory-mounted rubber seats side down. (Mounting screws: M4 X 6mm)

Horizontal position

* When connecting the battery and/or
adding another battery, be sure to
place the battery below
● Upright position (BU100XR2 only)
Install the supplied upright stand to the UPS.
Great care should be taken to install upright stand on the left
side of the UPS.
Upright position
* When you install the UPS in the
upright position, be sure to
install the upright stand on the
left side of the UPS. (To position
heavy components on the lower
part of the UPS)
* An add-on battery unit does not
permit the upright position.
15
2. Installation and connection