Venting Kits - Kenmore 110.77102310 Installation Instructions Manual

Venting Kits
For more information, call 1-800-901-2042, or visit us at
www.applJanceaccessaries.com. In Canada, call
1-800-807-6777 or visit us at www.whirlpoolparts.ca.
Part Description
Number
8171587RP 0-5" Metal vent periscope
4396037RP 0"-18" Metal vent periscope
4396011RP 18"-29" Metal vent periscope
4396014 29"-50" Metal vent periscope
4392892 in-Wail metal DuraVent
TM
Periscope
279818 4-way vent kit - white
W10470674 4-way vent kit - universal grey
4396028 Sure Connect
TM
venting kit
(over-the-top installation)
4396009RP 5' Universal connect vent, flexible dryer venting
4396010RP 6' SecureConnect
TM
vent° flexible dryer venting
4396013RB Dryer vent installer's kit
4396033RP 5' Flexible dryer venting with clamps
4396727RP 8' Flexible dryer venting with clamps
4396004 Dryer offset elbow
4396005 Wall offset elbow
4396006RW DuraSafe
TM
close elbow
4396007RW Through-the-wall vent cap
4396008RP 4" Steel dryer venting clamps - 2 pack
8212662 Flush mounting Iouvered vent hood 4"
Special provisions for mobile home installations:
The exhaust vent must be securely fastened to a noncombustible
portion of the mobile home structure and must not terminate
beneath the mobile home. Terminate the exhaust vent outside.
Determine vent path:
[] Select route that will provide straightest and most direct
path outdoors.
[] Han installation to use fewest number of elbows and turns.
[] When using elbows or making turns, allow as much room
as possible.
[] Bend vent gradually to avoid kinking.
[] Use as few 90 ° turns as possible.
Determine vent length and elbows needed for best
drying performance:
[] Use following "Vent System Chart" to determine type of vent
material and hood combinations acceptable to use.
NOTE: Do not use vent runs longer than those specified
in "Vent System Chart." Exhaust systems longer than those
specified will:
[] Shorten life of dryer.
[] Reduce performance, resulting in longer drying times
and increased energy usage.
The "Vent System Chart" provides venting requirements that wiil
help achieve best drying performance.
Number of
90 ° turns
or elbows
0
1
2
3
4
Vent S
Type
of vent
RigldmetoJ
RigldmetoJ
RigldmetoJ
RigldmetoJ
RigldmetoJ
rstem Chart
j Box/louvered
hoods
64 ft. (20 m)
54 ft. (16.5 m)
44 ft. (13.4 m)
35 ft. (10.7 m)
27 ft. (8.2 m)
Angled
hoods
58 ft. (17.7 m)
48 ft. (14.6 m)
38 ft. (11.6 m)
29 ft. (8.8 m)
21 ft. (6.4 m)
NOTE: Side and bottom exhaust installations have a 90 ° turn
inside the dryer. To determine maximum exhaust length, add
one 90 ° turn to the chart.
15