Hilti SD 6000 Original Operating Instructions page 7

Application
Fastening metal framing to
metal framing (max. fasten-
able thickness 2.5 mm)
Fastening drywall board to
wood
Fastening drywall board to
metal (≦0.88 mm) and wood
framing
Fastening particle board
(chipboard) to wood framing
Fastening: Wood to wood,
wood to particle board
(chipboard), particle board
to wood, screws up to
140 mm in length
Fastening: Wood to metal,
steel grade: ST 37 to 12 mm,
steel grade: ST 52 to 8 mm
2.3 Chuck
¹/₄" bit holder
2.4 Switches
Speed control switch for smooth speed control and lockbutton for sustained operation.
Forward / reverse switch
2.5 Grips
Vibration-absorbing grip
2.6 Lubrication
Grease lubrication
2.7 The items supplied include (cardboard box versions):
1 Power tool
1 Depth gauge
1 Operating instructions
1 Cardboard box
1 Belt hook
1 Bit
1 Bit holder
2.8 Using extension cords
Use only extension cords of a type approved for the application and with conductors of adequate cross section. The
power tool may otherwise loose performance and the extension cord may overheat. Check the extension cord for
damage at regular intervals. Replace damaged extension cords.
Screw type
SD 6000
/ ∅ in mm
x
Special drywall
screw with
drill point,
type S‑DD 02 and
S‑DD 03
Drywall screw
with needle point,
type S‑DS 03
Drywall screw
with needle point,
type S‑DS 14
Drywall screw
with needle point,
type S‑DS 03
Wood screws
Self-drilling wing
screw with drill
point, type S‑WW
SD 5000 SD 2500
x
x
x
x x
x
x
en
15