CAUTION:
all bays are populated with either a component or a blank.
To remove the component:
Back up all server data on the drive.
1.
Power down the server (on page 28).
2.
Remove the power from the server:
3.
Disconnect the power cord from the power source.
a.
Disconnect the power cord from the server.
b.
Remove the drive.
4.
Remove the drive from the carrier.
5.
To replace the component, reverse the removal procedure.
Access panel
To remove the component:
WARNING:
internal system components to cool before touching them.
CAUTION:
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
Power down the server (on page 28).
1.
To prevent improper cooling and thermal damage, do not operate the server unless
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Do not operate the server for long periods with the access panel open or removed.
Removal and replacement procedures 35