Drive Cage Assembly - HP ProLiant DL320e Gen8 v2 Maintenance And Service Manual

Remove the server from the rack (on page 30).
o
Remove the access panel
4.
Do one of the following:
5.
Disconnect the Mini-SAS cable from the system board, and then disconnect the cable from the drive
o
cage.
Disconnect the Mini-SAS cable from the expansion board, and then disconnect the cable from the
o
drive cage.
To replace the component, reverse the removal procedure.

Drive cage assembly

To remove the component:
Power down the server (on page 28).
1.
("Access panel" on page 35).
Removal and replacement procedures 39