Web Configuration Page Interface Structure - Teltonika RUT104 User Manual

4.3 WEB configuration page interface structure

The main Web management menu is displayed after successful login into the system (Figure 3).
From this menu all essential configuration pages are accessed.
By default the Quick Setup menu is activated. The web management menu has the following
structure:
Quick Setup – quick router configuration wizard.
Status
System Information – displays general information of the device status.
Hardware information – displays device hardware information.
Routes – displays the rules which are currently active on this system.
Kernel log – displays the information about device kernel activity.
Configuration
Mobile Network Settings
Network Settings
Wireless Settings
Dynamic DNS Settings
Services – SSH, HTTPS services management.
VPN
OpenVPN – Create site to site tunnel or site to multi site tunnels.
GRE Tunnel – Create GRE tunnel.
IPsec – IPsec client settings.
Admin
Account – change administrator's password.
NTP – Time and time synchronization settings.
Firmware upgrade
Firewall
General settings – General settings for your network interfaces to control network
traffic flow.
Traffic Rules – Defines policies traveling between different zones.
Port Forwarding
Custom Rules – Allow to execute arbitrary iptables commands which are not
otherwise covered by the firewall framework.
Tools
Site Survey – shows information about wireless networks in the local geography.
Ping Reboot – set up continuous ping IP address with possibility to automatically
reboot router if no echo received.
Diagnostics – Network utilities such as "Ping", "Traceroute" and "Nslookup" to
diagnose the network connection.
Figure 3. Main Management Menu
11 | P a g e