Hardware Information; Routes; Kernel Log - Teltonika RUT104 User Manual

3g
Hide thumbs Also See for RUT104:
Table of Contents

Advertisement

4.5.2

Hardware information

Uptime – displays the time since the system was last rebooted.
Firmware version – displays current version of the firmware.
Average system load – displays the average load of the device processor in the period of the
last 1 minute, 5 minutes and 15 minutes (a larger value means a larger average load on the processor:
<1.0 – System is idle; =1.0 – Normal load; >1.0 – Processor is busy).
LAN MAC address – displays wired LAN MAC address.
WLAN MAC address – displays wireless LAN MAC address.
Memory – displays total, free, cached and buffered system memory.
4.5.3

Routes

ARP – ARP Table shows map of the IP addresses assigned to the MAC addresses.
Active IPv4-Routes – shows the active LAN and WAN routes.
4.5.4

Kernel log

The Kernel log displays the information about device kernel activity.
Figure 5. Hardware information
Figure 6. Routes information
Figure 7. Kernel log information
14 |
P a g e

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents