Temperature Selector And Options Switches - GE EWA4600G0 Technical Service Manual

Note: The water level switch red and black wire
has a locking tab that must be depressed to be
disconnected. To remove this wire from the water
level switch, depress the clip using a small blade
screwdriver and pull the wire off the terminal as
shown.
ELECTRICAL TERMINAL
RELEASE/LOCKING TAB
4. Disconnect the 3 wires and the pressure hose
attached to the water level switch.
Pressure Hose
Disconnect
5. Press the plastic locking tab, rotate the switch
counterclockwise, and pull the switch out of the
control panel.

Temperature Selector and Options Switches

To remove the temperature selector and options
switches:
1.
2.
3.
4.
5.
Temperature Selector Switch
Disconnect
Options Switch
Plastic Locking Tab
– 16 –
Disconnect power.
Remove the knob by gently pulling it outward.
Place the control panel in the service position.
(See .)
Control Panel
Mark and disconnect the wires attached to the
switch.
Press the plastic locking tab, rotate the switch
counterclockwise, and pull the switch out of the
control panel.
Plastic Locking Tab
Plastic Locking Tab