This washer must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions sheet, you can receive one by visiting www.GEAppliances.com, or by calling 800.GE.CARES (800.432.2737). I Install or store where it will not be exposed to...
www.GEAppliances.com WHEN USING THE WASHER I Never reach into washer while it is moving. I The laundry process can reduce the flame Wait until the machine has completely stopped retardancy of fabrics. To avoid such a result, before opening the lid. carefully follow the garment manufacturer’s wash and care instructions.
(on models • Pull knob with a fabric Quick Start Guide softener dispenser) NOTE: When making a selection with any knob, simply point the knob anywhere within the shaded range for that setting. Model EWA4500 Model S5100 Model WKSE5260...
Page 5
www.GEAppliances.com Models WWRE5240 and WWSE5240 Model WARE5260 Model WNSE5260 Model WSRE5260...
About the control settings. Color Logic Select the correct TEMPERATURE setting. Match the particular color below the words with the same color on the Cycle Selector knob. Example: Washing a load of medium soiled cotton towels and sheets. Choose the LOAD SIZE. Choose the TEMPERATURE setting—for this load it would be the HOT COLD (which is a particular color).
Page 7
www.GEAppliances.com Wash Cycle The wash cycle controls the length of the washing process. The knob can be turned in either direction. Turning the Cycle Selector knob after starting a cycle will stop the washer and reset the cycle to the new selection. Press START to begin the new cycle selection. REMEMBER: When choosing the cycle, the Cycle Selector knob can be pointed anywhere...
About washer features. Autosoak Option (on some models) This option begins with a brief agitation, soaks for a specified period of time, then moves through the rest of the cycle automatically. On some models, this option is located on the Cycle Selector knob.
Page 9
www.GEAppliances.com The Agitator Cap or Fabric Softener Dispenser (depending on model) The agitator cap fits into the top of the Add water to dispenser until it reaches agitator. If it accidentally comes off, the maximum fill line. simply put it back on. The fabric softener dispenser automatically releases liquid fabric softener at the proper time during the cycle.
Loading and using the washer. Always follow fabric manufacturer’s care label when laundering. Sorting Wash Loads Sort by color (whites, lights, colors), soil level, fabric type (sturdy cottons, easy care, delicates), and whether the fabric produces lint (terry cloth, chenille), or collects lint (velveteen, corduroy). Proper Use of Detergent Add detergent and start the washer before adding You can use less detergent if you have soft water,...
For more information, visit www.GEAppliances.com, Fill Hoses: Hoses connecting washer to faucet or call 800.GE.CARES (800.432.2737). Do not store should be replaced every 5 years. the washer where it will be exposed to the weather.
Before you call for service… Troubleshooting Tips Save time and money! Review the charts on the following pages, or visit www.GEAppliances.com. You may not need to call for service. PERFECTEMP Possible Causes What To Do PerfecTemp The washer is in a cold •...
Page 13
www.GEAppliances.com OPERATION Possible Causes What To Do Washer won’t operate • Make sure cord is plugged securely into a working outlet. Washer is unplugged • Turn both hot and cold faucets fully on. Water supply is turned off • Check controls. Controls are not set properly •...
Page 14
Before you call for service… Troubleshooting Tips PERFORMANCE (cont.) Possible Causes What To Do Pilling Result of normal wear on • While this is not caused by the washer, you can slow the poly-cotton blends and pilling process by washing garments inside out. fuzzy fabrics Snags, holes, tears, rips •...
The transmission, suspension rod and spring assembly, if any of these parts should fail due From the date of the to a defect in materials or workmanship. GE will also replace the washer lid or cover, original purchase if they should rust under normal operating conditions. During this additional four-year limited warranty, you will be responsible for any labor or related service costs.
Contact Us www.GEAppliances.com If you are not satisfied with the service you receive from GE, contact us on our Website with all the details including your phone number, or write to: General Manager, Customer Relations GE Appliances, Appliance Park...