Setup For Dvr Port & Web Server Port Using Ip Sharing Router - Vista QP960H Installation And User Manual

Appendix 2
Setup for DVR port & web server port using IP sharing router
(Port Forwarding)
1. To use IP sharing router, "Dynamic IP" should be set to "OFF".
① DVR Port : This can be set to any number between 2000 to 65535.
② Web Server Port : This can be set to any number between 2000~65535, as long as it
2. Setup "virtual server" on IP sharing Router
It is for setting virtual server to forward IP which is allotted to DVR.
> For example;
DVR-1, IP : 192.168.10.107, DVR Port : 7000, Web Server Port : 7001
If DVR-1 is configured as above, the virtual server on IP sharing router is as follows.
① PC Server Name : DVR-1(IP 192.168.10.107)
Protocol : TCP, Internal Port : 7000, External Port : 7000
② PC Server Name : DVR-1 (IP 192.168.10.107)
Protocol : TCP, Internal Port : 7001, External Port : 7001
* For more detail, please refer to relevant IP sharing manual.
③ 'DDNS' Setup on IP sharing router
DDNS configuration is not needed in case of fixed IP.
④ To connect DVR-1 with Internet Explorer,
To connect DVR-1 with CD installer,
Quantum 960H DVR range manual V1.2
is not the same as the DVR Port number.
http://dvr-1.ddns-dvr.com:7001
http://dvr-1.ddns-dvr.com:7000
98