Vista QP960H Installation And User Manual page 28

1-5. OSD Setting
On Screen Display Setting: Selecting whether the time and date etc are shown on the screen
or not.
Status Bar
The display bar at the bottom of the screen can be set to be permanently on or to disappear
after a period of time.
Event Display
Icons such as recording mode, motion detection can be displays or not (On /Off)
Camera Names
The camera title can be displayed or not (On/Off)
PTZ display
When in telemetry mode the on screen telemetry display can be set to be Always on or to
disappear after a set period of inactivity 5 or 10 second or Off.
PTZ Timeout
The PTZ operation can be set to time out after a period of time.
PTZ Mode
The PTZ control can be limited by the PTZ mode.
Menu
The menu display can be set to time out after either 1 or 5 minutes.
Password Entry
The password entry display can be set to time out after 1 or 5 minutes.
Blending
The opacity of the menus and Status bar can be set between 0 and 6, 0 is solid, 6 being very
opaque.
28
Quantum 960H DVR range manual V1.2