Table of Contents
Advertisement
2-5. Audio Event
16 Audio Inputs and 1 Output are available. Recording can be triggered when Audio is
detected. As with Normal and Alarm recording, the Resolution and Images per second can
be set per channel. Individual channels can be enabled or disabled and the sensitivity set to
either Low, Middle or High.
2-6. Duration
The Duration mode allows the user to set the number of days that they require to record for.
The resolution; whether cameras are active or not and whether audio is being recorded can
each be set per channel. The user then sets the number of days of recording required, then
the Quantum will automatically calculate best record rate to achieve these settings
NOTE :
If recording is in Standby mode, the following icon is displayed.
34
Quantum 960H DVR range manual V1.2
Advertisement
Table of Contents
