Table of Contents
Advertisement
Video Type
Video Type can be set in this menu without rebooting or initialisation. The default is PAL,
NTSC can also be selected
IR Remote Address
The remote control can be used to control up to 16 DVRs, the ID number on each can be set
to a unique address so that the remote will only control one at a time if they are in close
proximity. The default is 11.
Repeated click on the ID value to change to the required number.
To select a unit on the remote control press the ID button, followed by the number, followed
by the ID button again. The LED will flash slowly.
VGA resolution
The VGA resolution can be set from 1024x768 to 1920x1080.
Initialization
All the menu settings will be returned to the factory default. To carry out this function the
system recording will have to be turned off.
Information
The Information Screen shows the hard disk size, current firmware revisions, IP address and
MAC address
38
Quantum 960H DVR range manual V1.2
Advertisement
Table of Contents
