Vista QP960H Installation And User Manual page 43

3-5. PTZ Setup
The DVR can control PTZ cameras via coax or a RS485 connection on the rear of the DVR.
The cameras can have individually selectable Protocols with a choice of Vista Coax, Vista
PD, Pelco P or Pelco D. The Baud rate can also be selected.
3-6. PTZ Controller
The Quantum DVR needs to be setup to accept the VKBD3im or VKBD4 keyboard, as a
default this will be set to the correct Protocol and Baud rate, the ID RS485 Address my need
to be adjusted dependant on the number of PTZ cameras on the system. The Keyboard ID
should not be the same as any of the domes on the system.
Quantum 960H DVR range manual V1.2
43