Table of Contents
Advertisement
Automatic timed log out
The system can be set to automatically log out a user after a certain amount of time if no key
presses have been made. The operator level has to have been activated before this can be
set. While in the account setup page for the User, click on the middle icon (
) at the
bottom of the menu page, the screen will change to show the following:
Click on the boxes adjacent to "Local" for the time out period for operation form the front
panel. Click on the box adjacent to "Client" for the time out period for operation form the
client software. This can be set to either: Off, 15 mins, 30 mins or 1 Hour.
Archive log access
Click on the icon (
) at the bottom of the menu page, the screen will change to show the
following:
Access to the archive log is password protected, use this section to amend the password per
user. This will allow traceability of which user has downloaded information.
41
Quantum 960H DVR range manual V1.2
Advertisement
Table of Contents
