Geneq iSXBlue II GNSS Series Technical Reference Manual page 28

View of Window Mobile 6.5
The next step is to assign a COM port number to the newly discovered iSXblue/SXBlue II device. Tap the
"Com Ports" tab then select "New Outgoing Port". Select the iSXBlue/SXBlue II receiver in the list and
hit "Next". Unselect the "Secure Connection" option and select a COM Port number (in this example:
COM 8). It is recommended that you start with the highest available COM port (usually COM 9, 8 and 7
are free; COM 6 is by default used by the Microsoft "External GPS" virtual COM port settings and can be
used, but the default settings must be changed for this utility under the "Settings" menu of the Windows
Mobile operating system; COM5 is a 50/50 pick; choosing a COM port below COM 5 is usually risky as
it might conflict with other internal components inside your PDA (internal GPS, Modem, etc). It all
depends on the model/brand you are using).
Hit "Finish".
View of Window Mobile 6.0
13
iSXblue/SXBlue II GNSS Series Technical Reference Manual