Aaeon EMB-A50M User Manual page 40

M i n i - I T X
WatchDog Timer Configuration Registers
07h 71h R/W
07h 72h R/W
07h 73h R/W
07h 74h R/W
Configure Control (Index=02h)
This register is write only. Its values are not sticky; that is to say, a
hardware reset will automatically clear the bits, and does not
require the software to clear them.
Bit Description
7-2 Reserved
Returns to the Wait for Key state. This bit is used when the
1
configuration sequence is completed.
Resets all logical devices and restores configuration
0
registers to their power-on states.
Watch Dog Timer Control Register (Index=71h, Default=00h)
Bit Description
7 WDT is reset upon a CIR interrupt.
6 WDT is reset upon a KBC (Mouse) interrupt.
5 WDT is reset upon a KBC (Keyboard) interrupt.
4 Reserved
3-2 Reserved
Force Time-out
1
This bit is self-cleared.
0 WDT Status
Appendix A Programming the Watchdog Timer A-4
00h Watch Dog Timer Control Register
20h Watch Dog Timer Configuration Register
38h Watch Dog Timer Time-out Value (LSB) Register
00h Watch Dog Timer Time-out Value (MSB) Register
E M B - A 5 0 M