Putting Up The Soft Top - Jeep Wrangler 2015 Operating Information Manual

21. Once the top is fully down, use the Velcro®
straps provided to secure the top to the
vehicle by wrapping the strap around the side
bows and through the slot on the body.
22. Close the front header latches.
23. Remove the door frames, if desired. Refer
to "Door Frame" in this section for further
information.
156

Putting Up The Soft Top

NOTE:
Be extremely careful when putting up the
soft top to prevent the doors from getting
scratched. It may be helpful to open the rear
doors.
1. Install the door frames, if removed. Refer to
"Door Frame" in this section for further infor-
mation.
2. Undo the straps used to secure the top in the
down position and store in secure location.
3. Open the swing gate.
4. Grasp the folded side bows and lift to the top
of the rear door frames.
NOTE:
Help from another person will ease this
operation.
5. Insert the slider feature of the knuckles into the
door frame tracks and slide the top forward.