Installing The Soft Top - Four-Door Models - Jeep Wrangler 2015 Operating Information Manual

6. Remove the soft top bow assembly pivot
bracket bolts (two per side) from the sport
bar using a 10.0 mm wrench or socket driver.
7. Lift the soft top in a upward motion to release
the pivot bracket from the sport bar bracket.
8. Remove the soft top from the vehicle and
store in a clean, dry location (another person
may be needed to help with this operation).
NOTE:
If you are doing this alone, use one arm to
hold the bundle up, the other to remove the
brackets.
9. Reinstall the hard top. Refer to "Freedom
Top™ Three-Piece Modular Hard Top —
Front/Rear Panel Installation" in this section.
Installing The Soft Top — Four-Door
Models
NOTE:
The following procedures are for first time
set up only. For future soft top procedures,
refer to "Soft Top" in this section.
1. Locate and remove the following items prior
to hard top removal:
• Right and left door frames
• Six door frame attachment knobs
• Right and left quarter windows
• Rear window
2. Remove the hard top. Refer to "Freedom
Top™ Three-Piece Modular Hard Top —
Front/Rear Panel Removal" in this section.
3. Install the door frames. Refer to "Door
Frame" in this section.
4. Install the soft top with the pivot brackets
above the sport bar brackets, lower the soft
top into the sport bar bracket slots in a
downward motion to lock tab on soft top.
117