No display
• Try recharging or replacing the rechargeable battery pack.
• Reset the base. Unplug the unit's electrical, then plug it back in.
• If the LED is not lit up, then try to unplug the unit's electrical power, and then
plug it back in.
If the handset disconnects from the base during a phone call
• Check that the power cord is connected properly into the base.
• Check that the power adapter is connected properly into the electrical
outlet.
• Move the handset closer to the base. It may be out of range.
• Reset the base by unplugging the unit's electrical power.
Reset the handset by unplugging and re-plugging its battery pack. Wait for
around 15 seconds and re-plug the power again. Allow up to one minute for
the handset to synchronize with the registered base again.
Noise interference on your radio or television
• Your base or charger may be too close. Move it as far away as possible.
28
Help