Installing And Charging The Handset Battery Pack - Motorola P1001 User Manual

3. Plug the other end of the power adapter into a power outlet and the
telephone line cord into a telephone wall jack.
4. Align the mounting slots on the base with the mounting posts on the wall.
Then push in and down until the phone is firmly seated.
NOTE
DO NOT use a power outlet controlled by a wall switch.
Make sure the wall is capable of supporting the weight of the phone, and use the
proper type of anchoring device for the wall material.
1.3

Installing and charging the handset battery pack

1. Take off the battery compartment cover to remove it. Place the supplied
rechargeable battery pack in the battery compartment, with the battery
connector plugged in, as shown.
2. Install the battery compartment cover back on.
3. Put the handset on the base to charge for at least 24 hours. Once charged,
the will indicate that the handset is fully charged.
IMPORTANT
Use only the rechargeable battery pack provided with the product.
8 Getting started