3.21.3 Setting the announcement mode
1. Press MENU and then VOL+ or REDIAL/VOL- to select
2. Press MENU and then VOL+ or REDIAL/VOL- to select
3. Press MENU and then VOL+ or REDIAL/VOL- to select the announcement
modes:
•
ANNC & RECORD
•
ANNOUNCE ONLY
message.
4. Press MENU to save.
3.21.4 Setting the number of rings
1. Press MENU and then VOL+ or REDIAL/VOL- to select
2. Press MENU and then VOL+ or REDIAL/VOL- to select
3. Press MENU and then VOL+ or REDIAL/VOL- to select the rings to answer.
(4 options are available:
4. Press MENU to save.
NOTE
If the Toll Saver setting is selected, the answering machine will pick up after two
rings if there are new messages, and after four rings if there is no message.
3.21.5 Announcement
This is the message your callers hear on the answering machine. There are two
pre-recorded outgoing messages, or you can record your own.
3.21.5.1 Recording the announcementt
1. Press MENU and then VOL+ or REDIAL/VOL- to select
2. Press MENU and then VOL+ or REDIAL/VOL- to select ANNOUNCEMENT.
3. Press MENU to select RECORD.
4. Press MENU and then VOL+ or REDIAL/VOL- to select the answer mode
ANNC & RECORD
5. Press MENU to start recording after the beep.
6. Press MENU again to stop recording and save the message. The just saved
message is played automatically.
NOTE
When playing the message, pressing MUTE will delete it and the pre-recorded
message will be played automatically.
24
invites your callers to leave a message.
lets callers hear your announcement but they cannot leave a
TOLL
SAVER, 3, 4, or
or
ANNOUNCE
ONLY.
ANSWER
ANSWERER
ANSWER
# OF
5
RINGS).
ANSWER
MACHINE.
MODE.
MACHINE.
RINGS.
MACHINE.
Using the Phone