Pre-Installation Check List; Dimensions - Bosch VG4 Series Installation Manual

AutoDome Modular Camera System
3.1.3 Tools Required
– Straight slot screwdrivers ~ 2.5 mm (0.1 in.) - 3.1 mm (1/8 in.)
– No. 2 Phillips screwdriver
– Appropriate tool for cutting hole in drywall or ceiling tile
– Pliers
3.2

Pre-installation Check List

1. Determine the location and distance for the power supply box based on its voltage and
current consumption. See Chapter 4: Cable and Wire Standards for specifications.
2. Install all rough wiring including: power, control, video, alarms I/O, relay I/O, and fiber
optic cabling.
WARNING! 24 VAC Class II power supply only.
!
3. A minimum of 216-mm (8 1/2-inch) of air space above the ceiling is required to install the
In-Ceiling Mount.
3.3

Dimensions

mm
inches
Fig. 3.2 In-ceiling Dimensional Outline
Bosch Security Systems, Inc.
176.8
DIA.
6.96
204.3
8.04
Installation Manual
Installing the In-Ceiling Mount | en
210.7
8.30
19.0
0.75
153.9
6.06
F01U010921 | 1.0 | 2006.10
41
150.2
5.91
94.0
3.70