Arming Buzzer; Buzzer Volume Adjustment; Intrusion Sensor Sensitivity Mode - Toyota VSS3-Hilux Owner's Manual

To exit:
1. Turn IG ON.
2. A long push on the remote unlock button, or on the LED push button.
Note:
During garage mode, the LED will flash at each ignition ON.
The exit from garage mode will be confirmed by 5 hazard flashes.

3.8. Arming buzzer

This option is disabled as default. To enable it, please contact your authorised retailer.
You can activate the buzzer to sound when you arm/disarm the system.
Remark:
– This can only be done in accordance with the local regulations.

3.9. Buzzer volume adjustment

The volume of the buzzer can be adjusted. Please contact your authorised retailer.

3.10. Intrusion sensor sensitivity mode

This mode will allow you to modify the intrusion sensor sensitivity (Ultrasonic sensors).
In some cases, leather seats or usage of seats protectors may trigger false alarms.
This might be due to the intrusion sensor being too sensitive for the car interior.
In those cases, the intrusion sensor sensitivity can be decreased from "standard" to "low".
To adjust it, please contact your authorised retailer.
Remark:
– To find out the last alarm cause, please refer to the paragraph 3.5., Alarm memory
VSS3 13