Before You Start - D-Link DSL-2750U Technical Support Setup Procedure

How to Configure 3G WAN Fail Over

Before you start:

1. Please make sure your firmware has been upgraded to the
latest version – TH_1.01. You may check your current firmware
version from the top right corner of the device WEB
management GUI.
2. Please check if your 3G USB Adapter is in the compatibility list
via this link ->
CAUTION: Please use a wired connection between the PC and the device
when doing configurations.
Step 1: Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address
bar type in the LAN IP Address of the DSL-2750U which is 192.168.1.1 and then press on the Enter
key on your keyboard.
Step 2: A login screen will appear, type in the User Name and the Password as "admin" all in lower
case and then type in Validate Code and then click on the Log In button.
FAQ : How To Configure 3G WAN Fail Over
Technical Support Setup Procedure
http://bit.ly/s1JgVV
-12-