Lan Settings - D-Link DIR-100 User Manual

DIR-100 Triple Play Router

LAN Settings

Use the LAN Settings menu to configure the IP settings of the Router and enable the Router's DHCP server.
With DHCP enabled, the Router can provide IP settings automatically for 253 clients on the private LAN.
LAN Settings menu
Type the new IP Address and click the OK button configure a new IP address of the Router. If DHCP is
enabled, the Router's IP address will be the base address for the pool of available IP addresses. The Router's
Subnet Mask is not configurable by the user.
DHCP is enabled by default. To stop DHCP service click to remove the check form the Enabled box for
Gateway acts as DHCP server.
The DCHP pool of available IP addresses is configured entering a range of IP addresses for DHCP. Type the
last segment of the Starting Address and Ending Address to define the DHCP pool. Choose the Lease
Time allowed for clients to hold an assigned IP address.
Click the OK button to apply and save the new LAN IP settings. The configurable IP pool for DHCP
changes automatically to accommodate a change in the Router's IP address.
21