Installation Information; Information You Will Need About Your Lan Or Computer - D-Link DIR-100 User Manual

Installation Information

Print this page and record the listed information here in case you have to re-configure your WAN
connection in the future or reset the device configuration settings.
Information you will need from your Internet service provider:
Username (PPPoE connections)
Password (PPPoE connections)
Internet Connection Type
Information you will need about your DIR-100 Ethernet Broadband Router:
Username
Password
LAN IP address of the DIR-100
LAN Subnet Mask of the DIR-100

Information you will need about your LAN or computer:

DHCP Client status
DIR-100 Triple Play Router
This is the Username that is used to log on to
your Internet service provider's network. It is
commonly in the form  user@isp.com.
This is the Password that is used, in
conjunction with the Username above, to log
on to your Internet provider's network.
This is the method that your ISP uses to send
and receive data between the Internet and your
computer.
This is the Username you will be prompted to
enter when you access the DIR-100
configuration screens using a Web browser.
The default Username is admin.
This is the Password you will be prompted to
enter when you access the DIR-100's
configuration windows using a Web browser.
There is no initial Password.
This is the IP address you will enter into the
Address field of your Web browser to access
the DIR-100's configuration windows using a
Web Browser. The default IP address is
192.168.0.1.
This is the subnet mask used by the DIR-100,
and will be used throughout your LAN. The
default subnet mask is 255.255.255.0.
Your DIR-100 Router is configured, by default,
to be a DHCP server. This means that it can
assign an IP address, subnet mask, and a
default gateway address to computers on your
LAN. The range of IP addresses the DIR-100
will assign are from 192.168.0.100 to
192.168.0.199. Your computer (or computers)
needs to be configured to Obtain an IP address
automatically (that is, they need to be
configured as DHCP clients.)
v
Record your
info here.
Record your
info here.
Record your
info here.