Two Stage Installation Diagram - ATEN CS1798 User Manual

CS1798 / CS17916 User Manual
7. Plug the First Stage unit's power adapter cable into its Power Jack, then
plug the power adapter into an AC source.
8. Turn on the power to all the computers.
Note: 1. The Power On sequence requires that all Second Stage units be
powered on first. After the second stage units are on, power on all
the First Stage units. After the Second and First stage units have
been powered on, the computers can be powered on.
2. The USB 2.0 hub cannot be accessed through the switch by
computers on the second or third level of a cascaded installation.

Two Stage Installation Diagram

22
USB HDMI
KVM Cable Set