Chapter 2. Hardware Setup; Overview; Installation Types; Before You Begin - ATEN CS1798 User Manual

Overview

For convenience and flexibility that allows mixing multiple platforms, the
CS1798 / CS17916 design utilizes custom USB HDMI KVM cables that serve
as intermediaries between the switch and the connected computers (refer to the
installation diagram on page 20).
A separate custom USB HDMI KVM cable is required for each computer
connection. The custom KVM cables are listed under Cables, on page 6.
Consult your dealer to find out which custom KVM cables best fit your needs.

Installation Types

The CS1798 / CS17916 offers two types of installation – 1) standalone/
cascade; and 2) multi-display – that require different cabling setups. Therefore,
the functions of both types are not available in one installation. See the
following sections in this chapter for details about the different cabling
requirements.

Before You Begin

1. Important safety information regarding the placement of this
device is provided on page 67. Please review it before
proceeding.
2. Make sure that power to all devices that you will be installing
has been turned off. You must unplug the power cords of any
computers that have the Keyboard Power On function.
Hardware Setup
Chapter 2
13