Software Installation - Mac Os - FELIXrobotics FELIX 3.0 User Manual

4.2 Software Installation – Mac OS
1. Plug in the power supply cable.
NOTE: The electronics board is NOT USB powered, so without the power cable the
electronics won't work. It needs the voltage of the purple wire to drive the logic of the board.
The power to the rest of the board is controlled by the CPU when needed.
2. Plug in the USB cable into the computer
3. Download Mac-drivers from: http://www.ftdichip.com/Drivers/VCP.htm.
4. Download repetier software (.dmg file) from:
http://shop.felixprinters.com/downloads/index.php?path=software/
5. Open .dmg file and copy Repetier-Host.app to your Application folder
6. Download latest printer profiles from
http://shop.felixprinters.com/downloads/index.php?path=software%2Fsfact+slicing+profiles/
7. Extract sfact.zip file (containing 1 folder with 2 subfolders: "sfact" and "sfact_profiles"
8. Copy sub-folder "sfact_profiles" to Macintosh H
9. Copy the "sfact" sub-folder to Applications folder (where the Repetier-Host.app is as well)
support@FELIXprinters.com
www.FELIXprinters.com
User manual FELIX 3.0 3d printer
http://www.repetier.com/download/ or from