FELIXrobotics FELIX 3.0 User Manual page 18

The profiles are easy to adjust and tweak yourself for further improvement. To do this just click the configure
button
This will show a very large number of settings to tweak. Don't worry: every setting is well documented. If you
are interested in knowing more just click the question mark button as indicated in the figure below.
1. Now back in the repetier main interface make sure the SFACT slicer is activated and select one of the
profiles.
2. Now it is time to slice our first object.
support@FELIXprinters.com
www.FELIXprinters.com
User manual FELIX 3.0 3d printer