Table of Contents
Advertisement
Press the upload button, and wait till the upload is complete. This normally takes between 1 to 2 minutes.
6.
The new firmware is now on your printer.
4.1.3
Printer Software – Repetier-Host
Repetier-Host provides the following functions:
-
Control your printer, move axes and set temperatures, monitoring etc.
-
Process your CAD files (STL files) and make them printable.
To install Repetier-Host on your PC take the following steps:
1.
Download latest version of Repetier-Host from
Navigate to software folder and download setupRepetierHostFELIXprinters*.exe
2. Run the setupRepetierHostFELIXprinters*.exe file and follow the installation instructions.
3.
Make sure the power cable and USB cable of the printer are connected.
4. Start Repetier-Host.
5.
Go to Config -> Printer settings.
support@FELIXprinters.com
www.FELIXprinters.com
User manual FELIX 3.0 3d printer
www.FELIXprinters.com/downloads
Hide quick links:
Advertisement
Table of Contents
