Light Kit (continued)
Install the three switch housing
screws, found in the
bag. Tighten all three screws securely.
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all 3
assembly screws could result in the light fixture falling.
Install a bulb into each of the sockets.
When necessary, replace with bulbs of
hardware
M8522-01 • 06/13/14 • © Casablanca Fan Company
the same type and wattage.
16
www.CasablancaFanCo.com
See next page for fan
operation instructions.
1.888.227.2178