Gigaset S650 H Pro User Manual page 42

Room monitoring
Switching off/interrupting the alarm
Switch off the alarm:
Interrupt the alarm:
Deactivating the alarm remotely
The alarm is forwarded to an external destination number.
The receiving phone supports tone dialling.
If the alarm is activated via a VoIP connection, the DTMF signalling must take place
via SIP info or RFC2833 (
¤
Accept alarm call
The alarm is deactivated and the handset is in idle status. The room monitor settings on the
handset (e.g. no ringtone) will remain activated until you press the display key OFF.
Reactivate room monitor with the same number:
40
¤
In idle status press the display key OFF
¤
Press the End call key
setting on the base station).
Press keys . . . the call is ended
during an alarm
. . . Reactivate ( p. 39) Save