Seagate ST2000NX0243 Product Manual page 18

PowerChoice Manufacture Default Power Condition Timer Values
Default power condition timer values have been established to assure product reliability and data integrity. A minimum timer
value threshold of two minutes ensures the appropriate amount of background drive maintenance activities occur.
Attempting to set a timer values less than the specified minimum timer value threshold will result in an aborted EPC "Set
Power Condition Timer" subcommand.
Power Condition Name
Idle_a
Idle_b
Idle_c
Standby_z
Setting power condition timer values less than the manufacturer specified defaults or issuing the EPC "Go to Power
Condition" subcommand at a rate exceeding the default timers may limit this products reliability and data integrity.
PowerChoice Supported Extended Power Condition Feature Subcommands
EPC Subcommand
00
H
01
H
02
H
03
H
04
H
05
H
PowerChoice Supported Extended Power Condition Identifiers
Power Condition Identifiers Power Condition Name
00
H
01 - 80
H
81
H
82
H
83
H
84 - FE
H
FF
H
Seagate Enterprise Capacity 2.5 HDD v3 SATA Product Manual, Rev. D
Manufacturer Default Timer Values
1 sec
4 min
10 min
15 min
Description
Restore Power Condition Settings
Go to Power Condition
Set Power Condition Timer
Set Power Condition State
Enable EPC Feature Set
Disable EPC Feature Set
Standby_z
Reserved
Idle_a
Idle_b
Idle_c
Reserved
All EPC Power Conditions
17