Table of Contents
Advertisement
Make calls
Voice calls
1.
In the standby mode, enter the phone number,
including the area code. To remove a number, press
C.
For international calls, press * twice for the +
character (replaces the international access code),
and enter the country code, area code (omit the
leading zero if necessary), and phone number.
2.
Press the call key to call the number.
3.
Press the end key to end the call (or to cancel the
call attempt).
Pressing the end key always ends a call, even if
another application is active.
To make a call from Contacts, press
Contacts. Scroll to the desired name, or enter the first
letters of the name to the search field. Matching
contacts are listed. To call, press the call key. If you
have saved several numbers for a contact, select the
desired number from the list.
130
Options during a call
To adjust the volume during a call, use the volume key
on the side of your device. You can also use the scroll
key. If you have set the volume to Mute, select
Unmute
To send an image or a video clip in a multimedia
message to the other participant of the call, select
Options
can edit the message and change the recipient before
sending. Press the call key to send the file to a
compatible device (network service).
To put an active voice call on hold while answering
another incoming call, select
switch between the active and the held call, select
, and select
Options
To send DTMF tone strings (for example, a password),
select
or search for it in Contacts. To enter a wait character
(w) or a pause character (p), press * repeatedly. To
send the tone, select OK. You can add DTMF tones to
the phone number or DTMF fields in a contact card.
first.
Send MMS
(in UMTS networks only). You
>
> Swap.
Options
Send
DTMF. Enter the DTMF string
>
© 2008 Nokia. All rights reserved.
Options
> Hold. To
Advertisement
Table of Contents
