Settings
Homepage
— Depending on the access point you
●
are setting up, enter the web address or the address
of the multimedia messaging centre.
Select
Options
Advanced settings
>
following settings:
Network type
— Select the internet protocol type
●
to transfer data to and from your device. The other
settings depend on the selected network type.
Phone IP address
(for IPV4 only) — Enter the IP
●
address of your device.
DNS address
— Enter the IP addresses of the
●
primary and secondary DNS servers, if required by
your service provider. Contact your internet service
provider to obtain these addresses.
Proxy server address
●
proxy server.
Proxy port number
●
the proxy server.
WLAN internet access points
Press
, and select
Tools
Connection
Access points
>
New access
point.
Follow the instructions from the WLAN service
provider.
168
to change the
— Enter the address of the
— Enter the port number of
Settings
>
>
Options
Edit
>
>
WLAN network name
●
or
Search for
network,
WLAN network mode
security mode
its access point device.
Network status
●
name is displayed.
WLAN network mode
●
an ad hoc network and to allow devices to send and
receive data directly; a WLAN access point device is
not needed. In an ad hoc network, all devices must
use the same
WLAN security mode
●
used: WEP,
802.1x
WPA/WPA2. If you select
encryption is used. The WEP, 802.1x, and WPA
functions can be used only if the network supports
them.
To enter the settings for the selected security mode,
select
WLAN security
Security settings for WEP
or
WEP key in use
●
privacy (WEP) key number. You can create up to four
WEP keys. The same settings must be entered on the
WLAN access point device.
— Select
Enter manually
networks. If you select an existing
and
are determined by the settings of
— Define whether the network
— Select
Ad-hoc
WLAN network
name.
— Select the encryption
(not for ad hoc networks), or
Open
network, no
settings.
— Select the wired equivalent
© 2008 Nokia. All rights reserved.
WLAN
to create