Still Image Camera Settings - Nokia N95-2 Manuallines

to the default settings after you close the camera, but
the main settings remain the same until you change
them again. To adjust the setup settings, use the
options in the active toolbar.
adjust colour and lighting", p. 84.
main settings, in the image or video mode, select
Options > Settings.

Still image camera settings

To change the main settings, in the image mode, select
Options Settings and from the following:
>
Image quality — Select
●
(2592x1944 resolution),
(2048x1536 resolution),
(1600x1200 resolution),
(1024x768 resolution), or
(640x480 resolution). The better the image quality,
the more memory the image consumes. If you want
to print the image, select
3M - Medium, or Print 2M -
to send it using e-mail, select
To send the image using a multimedia message,
select MMS 0.3M - Small.
These resolutions are only available in the main
camera.
© 2008 Nokia. All rights reserved.
See "Setup settings—
To change the
Print 5M - Large
Print 3M - Medium
Print 2M - Medium
E-mail 0.8M - Med.
MMS 0.3M - Small
Print 5M - Large, Print
Medium. If you want
E-mail 0.8M - Med..
Add to album — Select whether you want to save
●
the image to a certain album in Gallery. If you select
Yes, a list of available albums opens.
Show captured image
●
see the captured image after it is taken or
want to continue taking pictures immediately.
Default image name
●
for the captured images.
Extended digital zoom
●
(continuous) allows the zoom increments to be
smooth and continuous between digital and
extended digital zoom,
zoom increments to pause at the digital and
extended digital step point, and
amount of zoom while retaining the image
resolution.
Capture tone — Select the tone you want to hear
●
when you take a picture.
Memory in use — Select where you want to store
●
your images.
Rotate image — Select whether you want images
●
that are captured when the device is held upright
to be rotated when you open them in Gallery.
Restore camera settings
●
the default values to the camera settings.
Camera
— Select On if you want to
Off if you
— Define the default name
(main camera only) —
On (paused) allows the
Off allows a limited
— Select Yes to return
On
83