Table of Contents
Advertisement
Settings - Configuration
Here you set the times when the reactions in the TAB
Reaction are triggered.
1.
Select the day and enter the schedule.
Note
You can define up to 8 time periods (each from
00:00 to 00:00). The times in the individual peri-
ods must not overlap.
2.
Select whether the settings should be applied to all
days of the week with using Copy.
3.
Confirm the settings by clicking Apply and leave the
menu with OK.
Handling
Click on the TAB Handling.
Here you can configure the behavior of the recorder dur-
ing a detected event (for example: motion got detected)
by clicking the respective check box.
Parameter
Full Screen Monitoring
Audible Warning
Notification
The camera is displayed as
a full-screen picture in live
cast
The device emits a repeat-
ing tone
Notify Surveillance Cen-
ter
Send E-Mail
Trigger Alarm Output
Confirm the settings by clicking Apply and leave the
menu with OK
Sends an alarm signal to a
PC with the ABUS CMS
software. For this, the soft-
ware must be running and
the recorder must be in sur-
veillance mode.
An e-mail is sent to a spe-
cific e-mail address (see
page 124)
see page 124
134
Advertisement
Table of Contents
