Abus TVVR45030 User Manual page 54

TVIP2xxxx network cameras.
Saving and retrieving presets
1. Use the arrow buttons to move the network cam-
era to the required image section and save the
position, for example as Preset 1
2. Click on Call up to move to Preset 1.
Setting up and calling up patrols
1. Create several presets to use for the patrol
2. Click on + to select a preset
3. Add more presets to set up the required patrol.
on the play symbol to start the patrol.
4. Then click
Note
You can also start the patrol directly in the live im-
age of the respective network camera.
Motion
Select the camera channel under "Camera".
133
Select the checkbox for motion detection.
The motion detection in the network camera must also be
activated. For further details, refer to the network camera
manual.
Note
In order to record using the motion recognition, you
must set the time plan at recording (see p. 135).
Handling
Trigger Channel
When "Reaction" is clicked, the TAB Trigger channel
appears (only with motion recognition):
Select one or more camera channels that should carry
out a reaction in the event of an alarm.
Confirm the settings by clicking Apply and leave the
menu with OK.
Armin Schedule
Select the TAB Arming Schedule.
Settings - Configuration