Setting The Camera Output - Abus TVVR45030 User Manual

32-channel

Hide thumbs Also See for TVVR45030:

User manual (66 pages)

Table Of Contents

Table of Contents

Live view

Settings

Note

The live view can be set as follows.

Open the main menu, then click on "Configuration". Then

click on "Liveview":

The following settings are available in the TAB "General":

Video Output In-

VGA/HDMI, Main CVBS

terface

Select the connection where the set-

tings are changed

Different camera layouts

Live View Mode

Switching time between the individ-

Dwell Time

ual cameras and the sequence dis-

play

Activate/deactivate audio output of

Enable Audio

the video output The audio signal is

Output

only given if the corresponding cam-

era input is presented as a full

screen.

Allocate monitor for the output of

Event Output

events

in seconds, where the event on the

Full Screen Moni-

allocated monitor will be displayed.

toring Duration

in seconds, the duration of the Pop-

Post Event Dis-

up window when an event occurs.

play Time

Note

The recorder image can either be shown on an

HDMI or a VGA monitor. The combination of HDMI

and VGA output is supported.

The BNC output can be used either for a spot

monitor or a separate monitor.

Note

VGA monitor connected:

A connected HDMI/VGA monitor automatically

becomes the main monitor where the audio output

is also assigned. The BNC output Video Spot Out

output displays the cameras in sequence and in

full screen.

If during the boot process of the DVR the HDMI/ VGA cable is

not connected, the main video signal is displayed at BNC out-

117

put MAIN. Connect the HDMI/VGA cable and reboot the DVR

in order to display the main video signal at the VGA output.

No HDMI/VGA monitor connected:

The main video signal is displayed at BNC output

MAIN. The BNC output Video Spot Out output

displays the cameras in sequence and in full

screen.