Technical Specifications - Elation RAYZOR BEAM 2R User Manual

Specifications and features are subject to change without any prior written notice.
ERROR CODE
01Er
PAN Error
03Er
TILT Error
05Er
Color Wheel Error
06Er
Fix Gobo Wheel Error
ELATION© RAYZOR BEAM 2R™
E R R O R C O D E S
The PAN movement is not located in the default position after the reset.
This message will appear after a fixture reset if the magnetic-indexing
circuit malfunctions (sensor failed or magnet is missing) or there is a motor
failure (defective motor or a defective motor IC drive on the main PCB).
This error may also be displayed if the head/yoke was blocked during a
reset function.
The TILT movement is not located in the default position after the reset.
This message will appear after a fixture reset if the magnetic-indexing
circuit malfunctions (sensor failed or magnet is missing) or there is a motor
failure (defective motor or defective motor IC drive on main PCB). This error
may also be displayed if the head was blocked during a reset function.
The Color Wheel is not located in the default position after the reset.
This message will appear after the reset of the fixture reset if the
magnetic-indexing circuit malfunctions (sensor failed or magnet is missing)
or there is a stepper motor failure (defective motor or defective motor IC
drive on main PCB).
The Gobo Wheel 1 movement is not located in the default position after
the reset. This message will appear after a fixture reset if the
magnetic-indexing circuit malfunctions (sensor failed or magnet is missing)
or there is a stepper motor failure (defective motor or defective motor IC
drive on main PCB).
41
w w w . e l a t i o n l i g h t i n g . c o m
DESCRIPTION
RAYZOR BEAM 2R™ User Manual Ver. 1