Elation RAYZOR BEAM 2R User Manual page 12

LAMP SAFETY INSTRUCTIONS
• ALWAYS replace lamp every 6,000 Hours.
• Use only Genuine Original Phillips™ Platinum 2R lamps. Other brand lamps may
cause damage and void the warranty!
• NEVER touch the lamp with your bare hands, as the oil from your hands will
shorten the life of the lamp.
• Always disconnect the fixture's main power supply before replacing lamp.
• Allow fixture to cool for at least 15 minutes before attempting any type of service.
• Make sure ALL covers/panels are replaced/secured before operating the fixture
to prevent any risk and/or damage to eye retina from UV Radiation exposure!
LAMP INSTALLATION PROCEDURE
1. Place fixture on a flat surface and remove (3) screws marked "A", "B", and "C",
then remove rear cover plate to access the lamp.
LAMP COVER PLATE
w w w . e l a t i o n l i g h t i n g . c o m
12
RAYZOR BEAM 2R™ User Manual Ver. 1