Elation RAYZOR BEAM 2R User Manual page 17

LAMP HOURS RESET PROCEDURE
1. Activate the main menu by pressing MODE/ESC and toggle to "Information".
2. Press ENTER and press UP or DOWN to toggle to "Time Information".
3. Press UP or DOWN to toggle to "L-Timer Password" and press ENTER. Then press UP
or DOWN to enter the reset pass code, "038" and press ENTER to confirm. The
display will automatically revert to "L-Timer Password", next press UP or DOWN to
toggle down to "Clear Lamp Time".
4. Press ENTER and select "ON". The lamp timer has now been reset, press
MODE/ESC to exit the menu and return to the home screen.
LAMP OPTIMIZATION
Unlike traditional discharge lamps the Phillips
optimization. The lamp orientation and optimization procedure has been preset
during the manufacturing process of the lamp. Please remember the Phillips
Platinum 2R Lamp is NOT a hot-restrike lamp therefore, you must wait approximately
15 minutes before you can attempt to restrike the lamp once it has been turned off.
w w w . e l a t i o n l i g h t i n g . c o m
Platinum 2R Lamp does NOT require
™
17
RAYZOR BEAM 2R™ User Manual Ver. 1
™