Table of Contents
Advertisement
The following screen appears when you select the password icon
You can enter a password by:
• typing the password on the keyboard
• selecting each letter via the mouse
• selecting each letter via the pen stylus (pen access must be
customized for each specific hardware platform).
If you do not want to use a password, simply press <ENTER>
when the password prompt appears.
Setting a Password
The password check option is enabled in Advanced Setup by
choosing either Always or Setup. Here, you determine the pass-
word to be used. The password is stored in CMOS RAM.
To assign a password,
1. Enter a 1-6 character password. The password does not appear
on the screen when typed.
2. Retype the password when prompted by AMIBIOS.
A message box will appear when the password is confirmed.
58
SBC-456/456E User Manual
Advertisement
Table of Contents
