Aaeon SBC-456 User Manual page 50

Sbc-456/456e is an all-in-one single board 486 computer
Hide thumbs Also See for SBC-456:
Table of Contents

Advertisement

Wait for F1 if Error:
AMIBIOS POST error messages are followed by:
Press <F1> to continue
If this option is set to Disabled, AMIBIOS does not wait for you to
press the <F1> key after an error message. The settings are
Enabled or Disabled. The default setting is Enabled.
Hit Del Message Display:
Set this option to Disabled to prevent the message:
Hit <DEL> if you want to run Setup
from appearing on the first AMIBIOS screen when the computer
boots. The settings are Enabled or Disabled. The Optimal and
Fail-Safe default settings are Enabled.
Internal Cache:
This option specifies the caching algorithm used for the L1 internal
cache memory. The settings are:
Setting
Shadow
WriteBack
External Cache
This option specifies the caching algorithm used for L2 secondary
(external) cache memory. The settings are:
Setting
Disabled
WriteThru
WriteBack
42
SBC-456/456E User Manual
Description
The contents of C0000h - C3FFFh are
written to the same address in system
Use the write-back caching algorithm.
Description
The contents of C0000h - C3FFFh are
written to the same Neither L1 internal
cache memory on the nor L2 secondary
cache memory is enabled.
Use the write-through caching algorithm.
Use the write-back caching algorithm.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sbc-456e

Table of Contents