Replacing The Cleaning Roller - Magicard ENDURO series User Manual

Replacing the cleaning roller

A new cleaning roller is supplied with every new dye film roll.
Open the printer and remove the used dye film
–
A.
Pull out the used cleaning roller.
(This is the blue roller positioned behind and below the rear dye-film spool).
B.
Remove the metal bar from the centre of this cleaning roller.
C.
Slide the metal bar into the new cleaning roller.
D .
Peel off the white protective layer carefully to reveal tacky
surface.
E.
Place the new cleaning roll
ID Card Printer – User Manual
then:-
,
er into printer.
ID Card Printer – User Manual
- 21 -