Upgrading To Double-Sided - Magicard ENDURO series User Manual

UPGRADING TO DOUBLE-SIDED:

For users with a single-sided ID Card Printer, a double-sided upgrade kit can be purchased from your
ID Card Printer's.
With this simple drop-in kit you can change your
single-sided printer into a double-sided printer
and be printing double-sided (duplex) cards in
seconds!
STEP 1 - Power-up your printer.
STEP 2 - Open the lid and remove any dye film that
may have been previously installed (this can
be used again after the upgrade has been
completed).
STEP 3 - Load the special dye film supplied with the Upgrade Kit.
STEP 4 - Close the lid.
STEP 5 - The display now shows "Duo". Start duplex printing!
Upgrade FAQs
1. Q: Do I need any tools or mechanical knowledge?
A: Not at all. You just need to load the upgrade dye film roll and the printer does everything else
automatically.
2. Q: How does it work?
A: All of our ID Card Printers have a card flipper mechanism. The RFID tag in the special upgrade
dye film roll tells the printer to permanently change itself into a double-sided printer.
3. Q: Can I use this upgrade on other ID Card Printers?
A: No, once used in a printer it cannot be used to upgrade other machines.
4. Q: Do I have to keep this special upgrade dye film or spool for future use?
A: Just use the film from this special upgrade kit to print cards as normal.
Keep the empty blue upgrade spool for reference and warranty confirmation.
5. Q: What kind of dye film should I use now?
A: The upgrade dye film will work the same as the standard **250YMCKOK dye film, which is
used to print color on the front and resin black on the rear of a card. You can also use the
**300YMCKO to print color on both sides of the card if you prefer. You will need to adjust your
Driver settings depending on your requirements.
ID Card Printer – User Manual
ID Card Printer – User Manual
- 23 -